Rebar estimating in Orlando, Florida
Central Florida is inland and outside the HVHZ, which usually means lower wind loads and fewer corrosion concerns than the coasts. High-volume residential, hospitality and theme-park construction make fast, repeatable takeoffs a competitive advantage.
Wind & code
Indicative value per ASCE 7 / Florida Building Code. Always confirm with the local building department and project drawings.
What changes when you estimate in Orlando
- Large residential subdivisions with repetitive footing and slab details
- Hospitality, resorts and attractions with complex structural packages
- Mid-rise multifamily with post-tensioned slabs plus mild steel
- Good I-4 logistics keep delivery costs moderate
2026 rebar price reference
Orlando is often among the more competitive Florida markets on rebar pricing thanks to lower wind demand and easy highway logistics.
| Item | Per short ton | Per lb |
|---|---|---|
| Grade 60 stock rebar (distributor) | $1,000 – $1,500 | $0.50 – $0.75 |
| Fabricated (cut & bent), delivered | $1,300 – $1,900 | $0.65 – $0.95 |
| Furnished & installed | $2,200 – $3,500 | $1.10 – $1.75 |
Florida reference ranges; vary by supplier, volume and date.
Estimating rebar in Orlando?
IronBid runs the takeoff with AI from your drawings, applies Florida pricing and builds a client-ready bid.
Rebar sizes in millimeters and inches
US bar numbers indicate the nominal diameter in eighths of an inch (#4 = 4/8" = 1/2"). Use this chart when you work with metric drawings or imported steel.
| Bar | Inches | mm | Metric equiv. | lb/ft | kg/m |
|---|---|---|---|---|---|
| #3 | 3/8" | 9.5 | ø10 | 0.376 | 0.560 |
| #4 | 1/2" | 12.7 | ø12 | 0.668 | 0.994 |
| #5 | 5/8" | 15.9 | ø16 | 1.043 | 1.552 |
| #6 | 3/4" | 19.1 | ø20 | 1.502 | 2.235 |
| #7 | 7/8" | 22.2 | ø22 | 2.044 | 3.042 |
| #8 | 1" | 25.4 | ø25 | 2.670 | 3.973 |
| #9 | 1-1/8" | 28.7 | ø28 | 3.400 | 5.060 |
| #10 | 1-1/4" | 32.3 | ø32 | 4.303 | 6.404 |
| #11 | 1-3/8" | 35.8 | ø36 | 5.313 | 7.907 |
Minimum concrete cover (ACI 318)
| Cast against and permanently exposed to earth | 3 in (75 mm) |
| Exposed to weather or earth — #6 to #18 | 2 in (50 mm) |
| Exposed to weather or earth — #5 and smaller | 1-1/2 in (38 mm) |
| Not exposed — beams and columns | 1-1/2 in (38 mm) |
| Not exposed — slabs and walls, #11 and smaller | 3/4 in (19 mm) |
Code minimums for cast-in-place concrete. Coastal projects often specify more cover.
Frequently asked questions
Does Orlando have hurricane requirements for rebar?
Yes. Orlando is outside the HVHZ, but the Florida Building Code still requires design for hurricane wind speeds, which affects wall and connection reinforcement.
How much does rebar cost per ton in Orlando?
As a 2026 reference, stock Grade 60 rebar runs roughly $1,000–$1,500 per short ton, fabricated and delivered about $1,300–$1,900, and installed about $2,200–$3,500. Inland Central Florida is often in the lower-to-middle part of those ranges.
How can I speed up repetitive residential takeoffs?
Build the takeoff once per plan type and reuse it. Software with AI takeoff and templates lets you adjust only lot-specific changes instead of re-counting every bar.